Mostrar el registro sencillo del ítem

dc.contributor.advisorArévalo Vallejo, Raúl
dc.contributor.authorDelgado Loor, Elsa Viviana
dc.date.accessioned2019-09-19T20:36:09Z
dc.date.available2019-09-19T20:36:09Z
dc.date.issued2019
dc.identifier.urihttp://dspace.utb.edu.ec/handle/49000/6466
dc.descriptionSUMARY This research work was carried out in the El Tejar neighborhood, Ibarra canton, in which it was identified that phytosanitary problems are the main cause, low yields and low quality of the cob that farmers face. To carry out this work, the following objectives were proposed: Identify the morphological characteristics of the plague insect called Agrotis ypsilon; Identify the damage caused and the symptomatology of the insect that attacks the crop and know the management carried out by the producers for the control of pests and diseases in the crop. The damage caused by the insect causes production costs to increase and low economic income, due to ignorance of the identification of the pests, a compilation of information was made on the main phytosanitary problems that attack these crops; This information was collected directly from the main source, in the same area and with the affected farmers, through surveys, interviews and field monitoring, identifying the main pests that affect this crop, especially the pulper. This plague is a larva that attacks at night, completely cut the corn stem, this damage is done in the initial stage in which it is very susceptible and weak, after the first month the plants become very hard and are no longer you attack The most important control is the application of chemical products, mainly Lorsban and Nuvacron, with a dose of 500 to 750 mm/gr and a frequency of eight days during the critical stage. It is very important to hold training events to improve crop productivity.es_ES
dc.description.abstractRESUMEN Este trabajo de investigación se realizó en el barrio El Tejar, cantón Ibarra, en el que se identificó que, los problemas fitosanitarios son la principal causa, de bajos rendimientos y de baja calidad de la mazorca que enfrentan los agricultores. Para realizar este trabajo se planteó los siguientes objetivos: Identificar las características morfológicas que presenta el insecto plaga denominado Agrotis ypsilon; Identificar los daños causados y la sintomatología del insecto que ataca al cultivo y conocer el manejo que realizan los productores para el control de plagas y enfermedades en el cultivo. Los daños ocasionados por el insecto hacen que se incrementen los costos de producción y existan bajos ingresos económicos, por el desconocimiento de la identificación de las plagas, se realizó una recopilación de información sobre los principales problemas fitosanitarios que atacan a estos cultivos; este levantamiento de información se realizó directamente de la fuente principal, en la misma zona y con los agricultores afectados, mediante encuestas, entrevistas y monitoreo de campo, llegando a identificar a las principales plagas que afectan a este cultivo, en especial al trozador. Esta plaga es una larva que ataca en la noche, corta por completo el tallo del maíz, este daño lo realiza en la etapa inicial en la que es muy suscetible y débil, pasado el primer mes las plantas se vuelven muy duras y ya no son atacas; el control más importante es la aplicación de productos químicos, principalmente Lorsban y Nuvacron, con una dosis de 500 a 750 mm/gr y una frecuencia de ocho días durante la etapa crítica. Es muy importante realizar eventos de capacitación para mejorar la productividad del cultivoes_ES
dc.format.extent35 pes_ES
dc.language.isospaes_ES
dc.publisherEl Angel: UTB, 2019es_ES
dc.rightsopenAccesses_ES
dc.subjectFito sanidades_ES
dc.subjectIdentificares_ES
dc.subjectInformaciónes_ES
dc.titleManejo y control de Agrotis ipsilon en el cultivo de maíz (Zea mays L.), en el barrio El Tejar, ciudad de Ibarraes_ES
dc.typebachelorThesises_ES


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem